Kimark's dual flare is designed specifically for dual stream VOC control at a 98% DRE. The flare controls low pressure (i.e., storage vessel flash) and high pressure (e.g., wellhead, separator, etc.) vapor with one footprint. With a minimum height of thirty (30) feet our smallest version can handle flow rates of 2.5 MMCFD (30 psig). At fifty (50) feet tall, our largest version is maxes out at 5 MMCFD (30 psig). With three sizes to choose from and the capability to increase the vent height, Kimark dual flares can meet company safety standards/requirements and regulatory compliance regulations.
KIMARK SYSTEMS OFFER A DUAL FLARE IN THREE (3) VERSIONS, DEPENDING ON YOUR APPLICATION. THE MORE FLOW, THE GREATER THE RADIATION; THEREFORE, THE HIGHER THE STACK MUST BE TO ENSURE A SAFE DISTANCE FROM FLAME CENTER.
LP (low pressure), HP (high pressure)
All Kimark and OTA equipment is designed to federal and state design, monitoring, and operational requirements. The dual flare is no different. It operates with a continuous burning pilot with a backup auto-ignition system to ensure that when vapors are present, they will be ignited. The onboard logging computer records equipment performance important from operation and regulatory standpoints. It operates in a leak free capacity with its ability to cutoff stream flow in emergency situations. The dual flare meets the standards set forth in 60.18 of the NSPS (i.e. flare tip velocity, minimum heating value, recordkeeping, etc.).
Dual Flare in Action VIDEO
50 PSIG of inlet pressure moving about 2 MMSCFD; 15-20 MPH wind gusts; 14-1 Turndown Ratio
Dual Flare AT NIGHT VIDEO
30 PSIG of inlet pressure moving about 5 MMSCFD; <10 MPH wind gust; 14-1 Turndown Ratio